Product Description
Angle Gearbox 90Degree Hollow Shaft High-Quality Efficiency Industries Manufacturers Gear Drives Compact Reducer Low Backlash Helical Spiral Bevel Angle Gearbox
High-Quality Right Angle Gear Drives are designed for efficiency, quiet operation, and long service life. CZPT offers a broad selection of Right Angle Gear Drives in various configurations, materials, operating speeds, and multiple ratios. Standard catalog items include precision and commercial quality gear drives offered in both inch and metric sizes. For modifications or custom designs call and speak to a CZPT applications engineer.
Our offering includes, but is not limited to the following:
Miniature sized Right Angle Gear Drives, 1 inch square, are perfect for compact designs that require low backlash and input speeds up to 2000 rpm.
When weight is an issue, get Right Angle Bevel Gear Drives that feature a lightweight housing of PTMT Polyester 30% glass filled, precision ground stainless steel shafts, sintered bronze bearings and molded nylon gears.
Right Angle Worm Gear Drives accommodate input speeds up to 2000 rpm and are available in gear ratios: 5:1, 10:1 and 20:1.
Right Angle and Dual Helical Gear Drives are offered in 2 models, light-duty, rated speeds up to 600 rpm and heavy duty, rated speeds up to 1725 rpm.
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
Worm gear reducer gearbox
Cheaper than planetary gearboxes In many cases, worm gear reducer gearboxes are a popular alternative to planetary gearboxes. A worm gear reducer gearbox is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer gearbox is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer gearbox adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducer gearboxes are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.
The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer gearbox is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer gearbox to reduce vibration without damaging the output shaft.
Compact worm gear reducer gearboxes are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.
high efficiency
High-efficiency worm gear reducer gearboxes are ideal for applications that require precision, repeatability, and efficient performance. These reducer gearboxes are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducer gearboxes through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducer gearboxes are more efficient than their counterparts.
The high-efficiency worm reducer gearbox is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducer gearboxes include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducer gearboxes can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.
low clearance
A low-clearance worm reducer gearbox is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducer gearboxes can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.
quieter
The quieter worm reducer gearbox is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducer gearboxes are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducer gearboxes are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducer gearboxes are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducer gearboxes can be upgraded to improve their performance by combining with other gear trains or gearboxes.
easy to replace
An easily replaceable worm gear reducer gearbox can save you a lot of money. A worm gear reducer gearbox is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducer gearboxes can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer gearbox. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducer gearboxes offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducer gearboxes is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducer gearboxes are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer gearbox for your equipment.
When replacing the worm gear reducer gearbox, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.
editor by CX 2023-05-19
China RV Worm Gear Drive Gearbox with Hollow Shaft Transmission helical worm gearbox
Product Description
Product Description
Primary Resources:
1)housing:aluminium alloy ADC12(measurement 571-090) die forged iron HT200(measurement one hundred ten-150)
2)Worm:20Cr, ZI Involute profile carbonize&quencher warmth remedy make equipment floor hardness up to 56-sixty two HRC Right after precision grinding, carburization layer’s thickness amongst .3-.5mm.
three)Worm Wheel:wearable stannum alloy CuSn10-1
Thorough Photos
Blend Options:
Enter:with enter shaft, With sq. flange,With IEC standard input flange
Output:with torque arm, output flange, solitary output shaft, double output shaft, plastic include
Worm reducers are accessible with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Personal computer, NMRV+UDL, NMRV+MOTORS
Exploded See:
Product Parameters
| Previous Model |
New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
| RV571 | 7.5~100 | 25mm | .06KW~.12KW | Φ9 | Φ11 | 21N.m | .7kgs | |
| RV030 | RW030 | 7.5~100 | 30mm | .06KW~.25KW | Φ9(Φ11) | Φ14 | 45N.m | one.2kgs |
| RV040 | RW040 | seven.5~a hundred | 40mm | .09KW~.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | two.3kgs |
| RV050 | RW050 | seven.5~a hundred | 50mm | .12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~a hundred | 63mm | .18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | seven.5~one hundred | 75mm | .25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | seven.5~one hundred | 90mm | .37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | thirteen.0kgs |
| RV110 | RW110 | seven.5~one hundred | 110mm | .55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | seven.5~one hundred | 130mm | .75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | forty eight.0kgs |
| RV150 | RW150 | 7.5~one hundred | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
GMRV Outline Dimension:
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | eighty | 97 | 54 | 44 | 14 | 55 | 32 | fifty six | 63 | 65 | 29 | 55 | forty | fifty seven | thirty | 75 | forty four | six.five | 21 | five.five | M6*10(n=4) | 0° | 5 | 16.three | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | seventy five | 36.five | 70 | 50 | seventy one.5 | forty | 87 | 55 | six.five | 26 | six.five | M6*10(n=4) | 45° | six | twenty.8(21.8) | 35 |
| 050 | 120 | a hundred and forty four | eighty | 70 | 25(24) | 70 | 49 | eighty five | ninety two | eighty five | forty three.five | eighty | 60 | eighty four | 50 | one hundred | sixty four | eight.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | forty |
| 063 | one hundred forty four | 174 | one hundred | eighty five | twenty five(28) | 80 | 67 | 103 | 112 | ninety five | fifty three | ninety five | 72 | 102 | 63 | 110 | eighty | eight.5 | 36 | 8 | M8*twelve(n=8) | 45° | 8 | 28.3(31.3) | fifty |
| 075 | 172 | 205 | a hundred and twenty | ninety | 28(35) | ninety five | seventy two | 112 | a hundred and twenty | one hundred fifteen | 57 | 112.five | 86 | 119 | 75 | 140 | 93 | 11 | forty | 10 | M8*14(n=8) | 45° | eight(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | one hundred forty | one hundred | 35(38) | 110 | 74 | 130 | a hundred and forty | one hundred thirty | sixty seven | 129.5 | 103 | a hundred thirty five | 90 | 160 | 102 | 13 | forty five | eleven | M10*16(n=8) | 45° | ten | 38.3(forty one.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | forty two | a hundred thirty | – | 144 | a hundred and fifty five | one hundred sixty five | 74 | a hundred and sixty | 127.5 | 167.5 | 110 | two hundred | a hundred twenty five | 14 | 50 | fourteen | M10*eighteen(n=8) | 45° | twelve | 45.three | eighty five |
| 130 | 293 | 335 | two hundred | 120 | forty five | one hundred eighty | – | one hundred fifty five | a hundred and seventy | 215 | 81 | 179 | 146.5 | 187.five | a hundred thirty | 250 | a hundred and forty | sixteen | sixty | 15 | M12*twenty(n=8) | 45° | 14 | 48.8 | one hundred |
| one hundred fifty | 340 | four hundred | 240 | one hundred forty five | fifty | a hundred and eighty | – | 185 | two hundred | 215 | 96 | 210 | 170 | 230 | one hundred fifty | 250 | one hundred eighty | 18 | seventy two.five | eighteen | M12*22(n=8) | 45° | fourteen | 53.eight | 120 |
Company Profile
About CZPT Transmission:
We are a professional reducer producer situated in HangZhou, ZHangZhoug province.
Our leading goods is full assortment of RV571-one hundred fifty worm reducers , also provided GKM hypoid helical gearbox, GRC inline helical gearbox, Computer models, UDL Variators and AC Motors, G3 helical gear motor.
Products are commonly employed for apps this sort of as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-creating, construction machinery, metallurgic mine, environmental protection engineering, and all types of automated lines, and assembly strains.
With quick supply, excellent right after-income service, superior making facility, our merchandise market well both at property and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Center East and so on.Our aim is to create and innovate on basis of substantial high quality, and develop a good track record for reducers.
Packing data:Plastic Baggage+Cartons+Wood Cases , or on ask for
We participate Germany Hannver Exhibition-ZheJiang PTC Reasonable-Turkey Get Eurasia
Logistics
After Income Provider
one.Upkeep Time and Guarantee:Within 1 year following acquiring items.
two.Other Support: Such as modeling choice manual, installation guide, and dilemma resolution information, etc.
FAQ
1.Q:Can you make as for every consumer drawing?
A: Indeed, we provide personalized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your phrases of payment ?
A: thirty% deposit prior to production,stability T/T before shipping.
3.Q:Are you a trading firm or producer?
A:We are a manufacurer with advanced gear and knowledgeable employees.
4.Q:What is actually your creation ability?
A:8000-9000 PCS/Thirty day period
five.Q:Cost-free sample is available or not?
A:Yes, we can supply totally free sample if consumer concur to spend for the courier value
6.Q:Do you have any certificate?
A:Indeed, we have CE certification and SGS certificate report.
Get in touch with info:
Ms Lingel Pan
For any inquiries just come to feel totally free ton get in touch with me. A lot of many thanks for your type consideration to our firm!
|
US $12-220 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Right Angle |
| Gear Shape: | Worm Gear |
| Step: | Double-Step |
###
| Samples: |
US$ 12/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Old Model |
New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
| RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
| RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
| RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
| RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
| RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
| RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
|
US $12-220 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Right Angle |
| Gear Shape: | Worm Gear |
| Step: | Double-Step |
###
| Samples: |
US$ 12/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Old Model |
New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
| RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
| RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
| RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
| RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
| RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
| RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
Advantages and disadvantages of worm gear reducer gearbox
If you are looking for a worm gear reducer gearbox, you have come to the right place. This article will cover the pros and cons of worm gear reducer gearboxes and discuss the different types available. You will learn about multi-head worm gear reducer gearboxes, hollow shaft worm gear reducer gearboxes as well as hypoid gear sets and motors.
Hollow shaft worm gear reducer gearbox
Hollow shaft worm gear reducer gearboxes are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducer gearboxes depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducer gearboxes are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducer gearboxes are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducer gearboxes, there are also helical gear reducer gearboxes. These reducer gearboxes can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer gearbox is that it is more efficient than a single-stage gear reducer gearbox. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducer gearboxes are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.
Multi-head worm gear reducer gearbox
The multi-head worm gear reducer gearbox is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducer gearboxes have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer gearbox to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducer gearboxes are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
Hypoid Gear Set
Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.
Hypoid gear motor
A hypoid gear motor is a good choice for a worm gear reducer gearbox as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer gearbox can provide the same output as a 1/2 hp motor driving a worm reducer gearbox. A study by Agknx compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer gearbox when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducer gearboxes run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.
R series worm gear reducer gearbox
R series worm gear reducer gearboxes have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
AGKNX Electric Worm Gear reducer gearbox
AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
editor by czh 2023-02-06
China Heat Treatment 20cr Gear Shaft &Cusn10-1 Wearable Worm Gearbox helical worm gearbox
Product Description
Merchandise Description
Main Components:
one)housing:aluminium alloy ADC12(measurement 571-090) die solid iron HT200(dimensions a hundred and ten-one hundred fifty)
two)Worm:20Cr, ZI Involute profile carbonize&quencher warmth treatment make equipment floor hardness up to 56-sixty two HRC After precision grinding, carburization layer’s thickness in between .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-one
Comprehensive Photos
Mix Possibilities:
Input:with enter shaft, With sq. flange,With IEC normal input flange
Output:with torque arm, output flange, solitary output shaft, double output shaft, plastic go over
Worm reducers are offered with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Pc, NMRV+UDL, NMRV+MOTORS
Exploded View:
Product Parameters
| Old Model |
New Model | Ratio | Center Distance | Electrical power | Enter Dia. | Output Dia. | Output Torque | Excess weight |
| RV571 | 7.5~100 | 25mm | .06KW~.12KW | Φ9 | Φ11 | 21N.m | .7kgs | |
| RV030 | RW030 | seven.5~a hundred | 30mm | .06KW~.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
| RV040 | RW040 | 7.5~a hundred | 40mm | .09KW~.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | two.3kgs |
| RV050 | RW050 | seven.5~one hundred | 50mm | .12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | seven.5~100 | 63mm | .18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | six.2kgs |
| RV075 | RW075 | seven.5~one hundred | 75mm | .25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | 7.5~one hundred | 90mm | .37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
| RV110 | RW110 | seven.5~a hundred | 110mm | .55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | seven.5~a hundred | 130mm | .75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | forty eight.0kgs |
| RV150 | RW150 | seven.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
GMRV Outline Dimension:
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | eighty | 97 | fifty four | forty four | 14 | fifty five | 32 | fifty six | sixty three | 65 | 29 | fifty five | 40 | fifty seven | thirty | seventy five | 44 | 6.five | 21 | 5.5 | M6*ten(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | a hundred | 121.five | 70 | 60 | eighteen(19) | 60 | 43 | 71 | seventy eight | 75 | 36.5 | 70 | 50 | seventy one.5 | 40 | 87 | 55 | six.5 | 26 | 6.5 | M6*10(n=4) | 45° | six | twenty.8(21.8) | 35 |
| 050 | a hundred and twenty | 144 | 80 | 70 | twenty five(24) | 70 | forty nine | eighty five | 92 | eighty five | 43.five | 80 | sixty | eighty four | fifty | 100 | sixty four | 8.five | thirty | seven | M8*12(n=4) | 45° | eight | 28.3(27.3) | forty |
| 063 | a hundred and forty four | 174 | 100 | eighty five | twenty five(28) | eighty | sixty seven | 103 | 112 | ninety five | fifty three | ninety five | seventy two | 102 | sixty three | a hundred and ten | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | ninety | 28(35) | 95 | 72 | 112 | a hundred and twenty | one hundred fifteen | fifty seven | 112.five | 86 | 119 | 75 | one hundred forty | 93 | 11 | forty | ten | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | a hundred | 35(38) | one hundred ten | seventy four | a hundred thirty | one hundred forty | 130 | 67 | 129.five | 103 | 135 | 90 | 160 | 102 | 13 | forty five | 11 | M10*16(n=8) | 45° | 10 | 38.3(forty one.3) | 70 |
| a hundred and ten | 255 | 295 | one hundred seventy | one hundred fifteen | 42 | a hundred thirty | – | a hundred and forty four | one hundred fifty five | a hundred sixty five | seventy four | a hundred and sixty | 127.five | 167.5 | one hundred ten | 200 | 125 | fourteen | fifty | fourteen | M10*18(n=8) | 45° | twelve | forty five.three | eighty five |
| 130 | 293 | 335 | 200 | one hundred twenty | forty five | one hundred eighty | – | one hundred fifty five | one hundred seventy | 215 | eighty one | 179 | 146.5 | 187.five | a hundred thirty | 250 | a hundred and forty | 16 | sixty | 15 | M12*twenty(n=8) | 45° | 14 | forty eight.8 | 100 |
| 150 | 340 | 400 | 240 | a hundred forty five | 50 | one hundred eighty | – | 185 | 200 | 215 | ninety six | 210 | a hundred and seventy | 230 | 150 | 250 | one hundred eighty | eighteen | seventy two.5 | 18 | M12*22(n=8) | 45° | 14 | fifty three.eight | 120 |
Firm Profile
About CZPT Transmission:
We are a professional reducer company found in HangZhou, ZHangZhoug province.
Our major merchandise is full selection of RV571-one hundred fifty worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Laptop models, UDL Variators and AC Motors, G3 helical gear motor.
Items are commonly utilised for programs this kind of as: foodstuffs, ceramics, packing, substances, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental security engineering, and all kinds of computerized traces, and assembly lines.
With rapidly shipping, superior right after-sales provider, advanced making facility, our goods market well both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Center East and so on.Our purpose is to produce and innovate on basis of high top quality, and generate a good popularity for reducers.
Packing info:Plastic Luggage+Cartons+Wooden Situations , or on request
We take part Germany Hannver Exhibition-ZheJiang PTC Reasonable-Turkey Acquire Eurasia
Logistics
Soon after Sales Support
1.Routine maintenance Time and Guarantee:Within 1 yr following acquiring merchandise.
2.Other Service: Including modeling selection manual, installation guide, and issue resolution guide, etc.
FAQ
1.Q:Can you make as for each client drawing?
A: Yes, we provide tailored provider for buyers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your conditions of payment ?
A: thirty% deposit before generation,harmony T/T before delivery.
three.Q:Are you a trading organization or producer?
A:We are a manufacurer with sophisticated gear and experienced staff.
4.Q:What’s your creation capacity?
A:8000-9000 PCS/Month
5.Q:Cost-free sample is accessible or not?
A:Sure, we can provide free sample if buyer agree to shell out for the courier expense
six.Q:Do you have any certificate?
A:Indeed, we have CE certificate and SGS certification report.
Speak to information:
Ms Lingel Pan
For any concerns just truly feel totally free ton make contact with me. Several many thanks for your type consideration to our business!
|
US $10-200 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Right Angle |
| Gear Shape: | Worm Gear |
| Step: | Double-Step |
###
| Samples: |
US$ 12/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Old Model |
New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
| RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
| RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
| RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
| RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
| RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
| RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
|
US $10-200 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Right Angle |
| Gear Shape: | Worm Gear |
| Step: | Double-Step |
###
| Samples: |
US$ 12/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Old Model |
New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
| RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
| RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
| RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
| RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
| RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
| RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by czh 2023-01-05
China High efficiency f series gear reduction motors helical shaft gearbox with OEM custom worm gearbox advantages
Warranty: 1 many years
Applicable Industries: Hotels, Garment Outlets, Building Material Outlets, Producing Plant, Equipment Fix Shops, Meals & Beverage Manufacturing unit, Farms, Cafe, Home Use, Retail, Foodstuff Shop, Printing Stores, Development works , Strength & Mining, Foodstuff & Beverage Outlets, Other, Marketing Company, Other
Bodyweight (KG): thirteen KG
Personalized assistance: OEM, ODM, OEM
Gearing Arrangement: equipment motor
Output Torque: 200-18000N.M
Enter Pace: 750-1500RPM, 750-1500 Rpm
Output Speed: 5.6–393RPM, 5.6-393RPM
Enamel treatment: hardening
Equipment content: 20 CrMnTi
Materials of housing: Castion Iron
Set up: parallel axis
Design: F37
Product name: F sequence equipment motor
Model: huake
Packaging Specifics: Packed in cartons or pallet,or at your requirements.
Port: HangZhou port
High effectiveness f series equipment reduction motors helical shaft gearbox with OEM personalized F sequence Parallel Shaft Helical Gear Reducer Helical equipment challenging tooth floor composition, 2 / 3 gear mixtures can be selected to attain the required speed ratio, with strengthened cast iron shell, higher bearing capacity, can be matched with distinct sorts of motors, tiny measurement, light-weight weight, big torque, steady operation and minimal sound.
| Brand Title | HUAKE |
| Product Identify | F Parallel shaft helical gear units |
| Material | Steel or forged iron |
| Weight | 13Kg |
| Color | Customizable |
| Heat treatment method | Carburising,Quenching,Equipment Grinding |
| Features | F sequence helical gear reducer1.Exceptional good quality 2.Competitive value 3.promptly shipping and delivery |
Worm gear reducer
A worm gear reducer is a gear reducer that uses a worm gear train to reduce the required force. Unlike traditional gear reducers, these units are small and require low horsepower ratings. This reduces their efficiency, but their low cost and compact design help make up for this shortcoming. However, these gear reducers have some drawbacks, including their tendency to lock up when reversing.
high efficiency
High-efficiency worm reducers are ideal for applications where high performance, repeatability, and accuracy are critical. It consists of an input hypoid gear and an output hypoid bevel gear. The input worm rotates perpendicular to the output worm, so for every revolution of the input worm, the output gear makes one revolution. This arrangement reduces friction (another source of energy loss) in a high-efficiency worm gear to at least two arc minutes.
Compared with worm gear reducers, hypoid gearmotors offer several advantages, including lower operating costs and higher efficiency. For example, hypoid gear motors can transmit more torque even at high reduction ratios. Also, they are more efficient than worm gear reducers, which means they can produce the same output with a smaller motor.
In recent years, the efficiency of worm gear reducers has been dramatically improved. Manufacturers have made great strides in materials, design, and manufacturing. New designs, including dual-enveloping worm gear reducers, increase efficiency by 3 to 8 percent. These improvements were made possible through countless hours of testing and development. Worm gear reducers also offer lower initial costs and higher overload capability than competing systems.
Worm gear reducers are popular because they provide maximum reduction in a small package. Their compact size makes them ideal for low to medium-horsepower applications and they are reticent. They also offer higher torque output and better shock load tolerance. Finally, they are an economical option to reduce the device’s power requirements.
low noise
Low-noise worm gear reducers are designed to reduce noise in industrial applications. This type of reducer uses fewer bearings and can work in various mounting positions. Typically, a worm reducer is a single-stage unit with only one shaft and one gear. Since there is only one gear, the noise level of the worm gear reducer will be lower than other types.
A worm gear reducer can be integrated into the electric power steering system to reduce noise. Worm reducers can be made and from many different materials. The following three-stage process will explain the components of a low-noise worm reducer.
Worm gear reducers can be mounted at a 90-degree angle to the input worm shaft and are available with various types of hollow or solid output shafts. These reducers are especially beneficial for applications where noise reduction is essential. They also have fewer parts and are smaller than other types of reducers, making them easier to install.
Worm gear reducers are available from various manufacturers. Due to their widespread availability, gear manufacturers maintain extensive inventories of these reducers. The worm gear ratio is standard, and the size of the worm gear reducer is universal. Also, worm gear reducers do not need to be sized for a specific purpose, unlike other load interruptions.
A worm gear reducer is a transmission mechanism with a compact structure, large transmission ratio, and self-locking function under certain conditions. The worm gear reducer series products are designed with American technology and have the characteristics of stable transmission, strong bearing capacity, low noise, and compact structure. In addition, these products can provide a wide range of power supplies. However, these worm reducers are prone to leaks, usually caused by design flaws.
Worm gear reducers are available in single-stage and double-stage. The first type consists of an oil tank that houses the worm gear and bearings. The second type uses a worm gear with a sleeve for the first worm gear.
When choosing a gear reducer, it is essential to choose a high-quality unit. Improper gear selection can cause rapid wear of the worm gear. While worm gear reducers are generally durable, their degree of wear depends on the selection and operating conditions. For example, overuse, improper assembly, or working in extreme conditions can lead to rapid wear.
Worm reducers reduce speed and torque. Worm gears can be used to reduce the speed of rotating machines or inertial systems. Worm gears are a type of bevel gear, and their meshing surfaces have great sliding force. Because of this, worm gears can carry more weight than spur gears. They are also harder to manufacture. However, the high-quality design of the worm gear makes it an excellent choice for applications requiring high torque and high-speed rotation.
Worm gears can be manufactured using three types of gears. For large reduction ratios, the input and output gears are irreversible. However, the worm reducer can be constructed with multiple helices. The multi-start worm drive also minimizes braking effects.
Self-locking function
The worm reducer is self-locking to prevent the load from being driven back to the ground. The self-locking function is achieved by a worm that meshes with the rack and pinion. When the load reaches the highest position, the reverse signal is disabled. The non-locking subsystem back-drives the load to its original position, while the self-locking subsystem remains in its uppermost position.
The self-locking function of the worm reducer is a valuable mechanical feature. It helps prevent backing and saves the cost of the braking system. Additionally, self-locking worm gears can be used to lift and hold loads.
The self-locking worm gear reducer prevents the drive shaft from driving backward. It works with the axial force of the worm gear. A worm reducer with a self-locking function is a very efficient machine tool.
Worm gear reducers can be made with two or four teeth. Single-ended worms have a single-tooth design, while double-ended worms have two threads on the cylindrical gear. A multi-boot worm can have up to four boots. Worm reducers can use a variety of gear ratios, but the main advantage is their compact design. It has a larger load capacity than a cross-shaft helical gear mechanism.
The self-locking function of the worm reducer can also be used for gear sets that are not necessarily parallel to the shaft. It also prevents backward travel and allows forward travel. The self-locking function is achieved by a ratchet cam arranged around the gear member. It also enables selective coupling and decoupling between gear members.
high gear ratio
Worm reducers are an easy and inexpensive way to increase gear ratios. These units consist of two worm gears – an input worm gear and an output worm gear. The input worm rotates perpendicular to the output worm gear, which also rotates perpendicular to itself. For example, a 5:1 worm gearbox requires 5 revolutions per worm gear, while a 60:1 worm gearbox requires 60 revolutions. However, this arrangement is prone to inefficiency since the worm gear experiences only sliding friction, not rolling friction.
High-reduction applications require many input revolutions to rotate the output gear. Conversely, low input speed applications suffer from the same friction issues, albeit with a different amount of friction. Worms that spin at low speeds require more energy to maintain their movement. Worm reducers can be used in many types of systems, but only some are suitable for high-speed applications.
Worm gears are challenging to produce, but the envelope design is the best choice for applications requiring high precision, high efficiency, and minimal backlash. Envelope design involves modifying gear teeth and worm threads to improve surface contact. However, this type of worm gear is more expensive to manufacture.
Worm gear motors have lower initial meshing ratios than hypoid gear motors, which allows the use of smaller motors. So a 1 hp worm motor can achieve the same output as a 1/2 hp motor. A study by Nissei compared two different types of geared motors, comparing their power, torque, and gear ratio. The results show that the 1/2 HP hypoid gear motor is more efficient than the worm gear motor despite the same output.
Another advantage of the worm gear reducer is the low initial cost and high efficiency. It offers high ratios and high torque in a small package, making it ideal for low to medium-horsepower applications. Worm gear reducers are also more shock-resistant.
editor by czh
China wholesaler Chinese factory s series reducer multiple speed ratio helical gear worm reducer with shaft input combined worm gearbox
Warranty: twelve months
Applicable Industries: Producing Plant, Equipment Restore Shops, Foodstuff & Beverage Manufacturing facility, Retail, Building works , Strength & Mining
Excess weight (KG): ten KG
Customized help: OEM, ODM, OBM
Gearing Arrangement: Helical
Output Torque: 11-4530N.m
Enter Pace: three hundred-1800Rpm
Output Speed: .06-349rpm
Ratio:: 6.8-288
Color:: Blue(RAL5571)/Silver Grey (RAL9571)/In accordance to customer’s ask for
Assemble Sort:: S,SA,SF,SAF,SAZ
Mounting Placement:: Horizontal (foot mounted) or Vertical (flange mounted)
Enter format:: IEC flange, immediate with motor, shaft enter
Stage:: Solitary or 3 section
Equipment content:: Low carbon high alloy steel
Heat treatment:: Carburising/quenching/equipment grinding
Content: Steel or cast iron
Guarantee:: 12 Months
Packaging Details: wooden circumstances
Port: ZheJiang
S Series Helical-worm Gear ReducerThe design structure is compact, the functionality is excellent, the construction of worm and helical equipment, the pace ratio variety is massive, the optimized layout and manufacture are adopted. The gear floor is processed by large precision grinding, and the operation is steady and minimal noise, with huge bearing capacity and low power use.
| Series： | S Collection Helical Gear/Worm Reducer |
| Specifications： | 37、47、57、67、77、87、97 |
| Transmission Ratio： | 6.8~288 |
| Input Electricity (KW)： | 0.12~22 |
| Output Torque (N.m)： | 11~4530 |
What is a worm gear reducer?
A worm gear reducer is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer can increase the output torque of the engine according to the gear ratio. This type of gear reducer is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
Hollow shaft worm gear reducer
The hollow shaft worm gear reducer is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducers are usually used in combination with helical gear reducers. The latter is mounted on the input side of the worm gear reducer and is a great way to reduce the speed of high output motors. The gear reducer has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducers are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducers can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer, be sure to choose the correct one according to your requirements.
Double throat worm gear
Worm gear reducers use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
Self-locking function
One of the most prominent features of a worm reducer is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducers. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.
Heat generated by worm gears
Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
Size of worm gear reducer
Worm gear reducers can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducers great for space-saving applications. They also have low initial costs.
Worm gear reducers are one of the most popular types of speed reducers. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.
editor by czh
China factory K helical bevel gearbox power transmission 90 degree bevel gear reducer shaft mounted speed reducers KA67 KA77 KA87 KA97 KA107 with Free Design Custom
Specification K series helical bevel gearbox marine gearbox is 1 kind of Helical Bevel type gearbox , High-stainless cast iron case . ,it is designed based on modularization , which bring many difference kinds of combinations ,mounting types ,and structure designs .The detail classification of ratio can meet various of working condition .High Transmission efficiency ,Low energy consumption, superior performance . The hard tooth surface gear use the high quality alloy steel , the process of carburizing and quenching, grinding ,which give it follow characters : Stable transmission , low noise and temperature , CTU3150.1 CTU3200.1 CTU3300.1 CTU3500.1 CTU PWD SLW Hydraulic Dana CZPT Riduttori Spicer transmission track drive Gearbox high loading ,long working life. which widely use for industry equipment of metallurgy ,Building Material , Chemical , Mining , Oil, Transportation , Papermaking , Sugar making , engineering Machines ,etc
1) Output speed: 0.6~1,571r/min
2) Output torque: up to 21700N.m3) Motor power: 0.12~200kW4) Mounted form: foot-mounted and flange-mounted mounting
Product NameK series helical bevel gearbox marine gearbox Gear Material20CrMnTi Case MaterialHT250Shaft Material 20CrMnTiGear ProcessingGrinding finish by HOFLER Grinding MachinesColor CustomizedNoise Test65~70dB Efficiency94%~98% (depends on the transmission stage) Lubricating oilShell Omala synthetic oil or mineral oil , Plastic reduction gearbox for children car or similar brand Heat treatmenttempering, cementiting, quenching,etc.Brand of bearingsC&U bearing, ZWZ,LYC, HRB, SKF,NSK and so onBrand of oil sealNAK or other brandTemp. rise (MAX)40 °Temp. rise (Oil)(MAX)50 °Vibration≤ MB50117242A auto car gearbox gear 20µm Certifications trade show Packing Quality Control Company information Delivery Contact us
An Overview of Worm Shafts and Gears
This article provides an overview of worm shafts and gears, including the type of toothing and deflection they experience. Other topics covered include the use of aluminum versus bronze worm shafts, calculating worm shaft deflection and lubrication. A thorough understanding of these issues will help you to design better gearboxes and other worm gear mechanisms. For further information, please visit the related websites. We also hope that you will find this article informative.
Double throat worm gears
The pitch diameter of a worm and the pitch of its worm wheel must be equal. The two types of worm gears have the same pitch diameter, but the difference lies in their axial and circular pitches. The pitch diameter is the distance between the worm’s teeth along its axis and the pitch diameter of the larger gear. Worms are made with left-handed or right-handed threads. The lead of the worm is the distance a point on the thread travels during one revolution of the worm gear. The backlash measurement should be made in a few different places on the gear wheel, as a large amount of backlash implies tooth spacing.
A double-throat worm gear is designed for high-load applications. It provides the tightest connection between worm and gear. It is crucial to mount a worm gear assembly correctly. The keyway design requires several points of contact, which block shaft rotation and help transfer torque to the gear. After determining the location of the keyway, a hole is drilled into the hub, which is then screwed into the gear.
The dual-threaded design of worm gears allows them to withstand heavy loads without slipping or tearing out of the worm. A double-throat worm gear provides the tightest connection between worm and gear, and is therefore ideal for hoisting applications. The self-locking nature of the worm gear is another advantage. If the worm gears are designed well, they are excellent for reducing speeds, as they are self-locking.
When choosing a worm, the number of threads that a worm has is critical. Thread starts determine the reduction ratio of a pair, so the higher the threads, the greater the ratio. The same is true for the worm helix angles, which can be one, two, or three threads long. This varies between a single thread and a double-throat worm gear, and it is crucial to consider the helix angle when selecting a worm.
Double-throat worm gears differ in their profile from the actual gear. Double-throat worm gears are especially useful in applications where noise is an issue. In addition to their low noise, worm gears can absorb shock loads. A double-throat worm gear is also a popular choice for many different types of applications. These gears are also commonly used for hoisting equipment. Its tooth profile is different from that of the actual gear.
Bronze or aluminum worm shafts
When selecting a worm, a few things should be kept in mind. The material of the shaft should be either bronze or aluminum. The worm itself is the primary component, but there are also addendum gears that are available. The total number of teeth on both the worm and the addendum gear should be greater than forty. The axial pitch of the worm needs to match the circular pitch of the larger gear.
The most common material used for worm gears is bronze because of its desirable mechanical properties. Bronze is a broad term referring to various copper alloys, including copper-nickel and copper-aluminum. Bronze is most commonly created by alloying copper with tin and aluminum. In some cases, this combination creates brass, which is a similar metal to bronze. The latter is less expensive and suitable for light loads.
There are many benefits to bronze worm gears. They are strong and durable, and they offer excellent wear-resistance. In contrast to steel worms, bronze worm gears are quieter than their counterparts. They also require no lubrication and are corrosion-resistant. Bronze worms are popular with small, light-weight machines, as they are easy to maintain. You can read more about worm gears in CZPT’s CZPT.
Although bronze or aluminum worm shafts are the most common, both materials are equally suitable for a variety of applications. A bronze shaft is often called bronze but may actually be brass. Historically, worm gears were made of SAE 65 gear bronze. However, newer materials have been introduced. SAE 65 gear bronze (UNS C90700) remains the preferred material. For high-volume applications, the material savings can be considerable.
Both types of worms are essentially the same in size and shape, but the lead on the left and right tooth surfaces can vary. This allows for precise adjustment of the backlash on a worm without changing the center distance between the worm gear. The different sizes of worms also make them easier to manufacture and maintain. But if you want an especially small worm for an industrial application, you should consider bronze or aluminum.
Calculation of worm shaft deflection
The centre-line distance of a worm gear and the number of worm teeth play a crucial role in the deflection of the rotor. These parameters should be entered into the tool in the same units as the main calculation. The selected variant is then transferred to the main calculation. The deflection of the worm gear can be calculated from the angle at which the worm teeth shrink. The following calculation is helpful for designing a worm gear.
Worm gears are widely used in industrial applications due to their high transmittable torques and large gear ratios. Their hard/soft material combination makes them ideally suited for a wide range of applications. The worm shaft is typically made of case-hardened steel, and the worm wheel is fabricated from a copper-tin-bronze alloy. In most cases, the wheel is the area of contact with the gear. Worm gears also have a low deflection, as high shaft deflection can affect the transmission accuracy and increase wear.
Another method for determining worm shaft deflection is to use the tooth-dependent bending stiffness of a worm gear’s toothing. By calculating the stiffness of the individual sections of a worm shaft, the stiffness of the entire worm can be determined. The approximate tooth area is shown in figure 5.
Another way to calculate worm shaft deflection is by using the FEM method. The simulation tool uses an analytical model of the worm gear shaft to determine the deflection of the worm. It is based on a two-dimensional model, which is more suitable for simulation. Then, you need to input the worm gear’s pitch angle and the toothing to calculate the maximum deflection.
Lubrication of worm shafts
In order to protect the gears, worm drives require lubricants that offer excellent anti-wear protection, high oxidation resistance, and low friction. While mineral oil lubricants are widely used, synthetic base oils have better performance characteristics and lower operating temperatures. The Arrhenius Rate Rule states that chemical reactions double every ten degrees C. Synthetic lubricants are the best choice for these applications.
Synthetics and compounded mineral oils are the most popular lubricants for worm gears. These oils are formulated with mineral basestock and four to six percent synthetic fatty acid. Surface-active additives give compounded gear oils outstanding lubricity and prevent sliding wear. These oils are suited for high-speed applications, including worm gears. However, synthetic oil has the disadvantage of being incompatible with polycarbonate and some paints.
Synthetic lubricants are expensive, but they can increase worm gear efficiency and operating life. Synthetic lubricants typically fall into two categories: PAO synthetic oils and EP synthetic oils. The latter has a higher viscosity index and can be used at a range of temperatures. Synthetic lubricants often contain anti-wear additives and EP (anti-wear).
Worm gears are frequently mounted over or under the gearbox. The proper lubrication is essential to ensure the correct mounting and operation. Oftentimes, inadequate lubrication can cause the unit to fail sooner than expected. Because of this, a technician may not make a connection between the lack of lube and the failure of the unit. It is important to follow the manufacturer’s recommendations and use high-quality lubricant for your gearbox.
Worm drives reduce backlash by minimizing the play between gear teeth. Backlash can cause damage if unbalanced forces are introduced. Worm drives are lightweight and durable because they have minimal moving parts. In addition, worm drives are low-noise and vibration. In addition, their sliding motion scrapes away excess lubricant. The constant sliding action generates a high amount of heat, which is why superior lubrication is critical.
Oils with a high film strength and excellent adhesion are ideal for lubrication of worm gears. Some of these oils contain sulfur, which can etch a bronze gear. In order to avoid this, it is imperative to use a lubricant that has high film strength and prevents asperities from welding. The ideal lubricant for worm gears is one that provides excellent film strength and does not contain sulfur.
in Khamis Mushayt Saudi Arabia sales price shop near me near me shop factory supplier Wheel Bronze Duplex Ground Plastic Helical Shaft Brass Self Locking Steering Gear Miniature Worm and Worm Gear Suppliers Manufacturer manufacturer best Cost Custom Cheap wholesaler
It has proven steady cooperation with several properly recognized universities and institutes in china this sort of as, Zhejiang College, Jilin University, Technological committee of national chain drive common, Institute of countrywide chain push, Zhejiang application engineering content institute, Huhan materials safety institute and it cooperated to found China Very first Auto chain institute with National chain drive institute. EPG has been effectively accredited by ISO9002 Top quality Management Technique, ISO9001 Top quality Management System, API certificate, ISO/TS16949:2002 and ISO10012 measurement management method. We provide OEM services.
Wheel Bronze Duplex Ground Plastic EPTcal Shaft Brass Self Locking Steering EPT Miniature Worm and Worm EPT Suppliers EPT
in Mataram Indonesia sales price shop near me near me shop factory supplier Right Angle Gear Reducer with Gear Brake Motor R Helical Speed Gearboxr Helical Gear Box Shaft Helical Gearbox Helical Bevel Gearbox manufacturer best Cost Custom Cheap wholesaler
Our merchandise variety contains all varieties of helical equipment, spur gear, bevel gear, gear rack, worm equipment, sprockets,chains, bearings. The merchandise effectively shows environmental defense and strength preserving. Superior thermo treatment equipment, such as network warmth therapy oven, multi-use thermo remedy oven, etc.
| electric motor |
| motor |
| EPTed motor |
| EPT |
| EPTT EPTT |
| EPT box |
| spare parts |
| EPT motor |
| EPTed motor |
| EPTT |
EPTcal EPTTl speed EPTT, spiral EPTTl EPTT, EPTTl EPT EPTT
EPTcal EPTTl reduction EPTT, K series EPTTl EPTT, EPT EPTT, EPT unit,
EPTcal EPT motor, rigEPTT angle EPTT, EPT EPT pace EPTT
EPTT info
EstabEPTTd in 1985, EPT EPTT EPTTRY EPTT, LTD is a large and new EPT EPTTrprise engaging in study, deveXiHu (West EPT) Dis.Hu (West EPT) Dis. and manufacture for EPTT amp pace variator, one particular of the director member of EPTT EPTT Affiliation of EPTT EPTT EPTTry.
It covers more than forty,000 sq. meters, has much more than 400 personnel , 20% of whom are experts, geared up with far more than 300 sets the most EPTd accurate numerical handle equipment, incXiHu (West EPT) Dis.Hu (West EPT) Dis. German HOFLER forming EPT grinding EPTT to boost top quality.
established up far more than 30 national revenue branches to serve our clients in time and completely.
Our goods also exported to more than thirty countries primary in Europe, Asia The usa, and Africa, with substantial status.
EPTT management
EPTT
Connected EPTT sorts
| EPT Planetary EPTT | Robotic RV EPTT speed EPTT |
| Customized made Non-stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd EPTT | UDL Collection Variator |
| PYZ Series EPTcal Tooth Shaft Mounted EPTT | 8000 Series Cycloidal EPTT |
| SLT Collection Spiral EPTTl EPTT | SLSWL Sequence Worm Screw Jack |
| SLP Sequence Planetary EPTT | SLH/SLB Sequence EPT EPTT EPTT |
| NMRV Sequence Worm EPTT | BKM Sequence EPTcal-hypoid EPTT |
| SLRC Collection EPTcal EPTT | SLEPTR Sequence Shaft Mounted EPTT |
| SLXG Collection Shaft Mounted EPTT | X/B Collection Cycloidal EPTT |
| SLR/SEPTT/SLK/SLS Series EPTcal EPTT | AC/DC EPT |
Main solution record: 16 series incXiHu (West EPT) Dis.Hu (West EPT) Dis. SLR/SLS/SLK/SEPTT series hard tooth flank EPT EPTT , SLRC collection aluminium case helical EPT EPTTs,SLHSLB collection higher EPTT velocity EPTT, SLP sequence planetary velocity EPTT, X/B series cycloidal EPTT, SLXG series shaft-mounted EPT box, SLSWL collection worm screw jack, SLT collection helical cone EPT box, entirely more than ten,000 ratios, various specification make us at the head of domestic EPTT market, broadly provide the mechanical EPTT subject of ligEPTT amp heavy sector this sort of as: beer amp EPTTrage, mining EPTT, foodstuff EPTT, textile printing, rubber amp plastic substance, petrochemical market, jack-up transportation, pharmacy amp method hides, environmental safety gear.
Certificate
FAQ
one.Payment Time period: TT, L/C
two.Shipping time: about thirty daEPTTfrom EPT payment.
three.We settle for EPT merchandise as per your EPTT prerequisite.
4.XiHu (West EPT) Dis.hu (West EPT) Dis.traces for the Variety:Usually we can select a single EPTT which is suitable for you with some informations from you,this kind of as ratio/motor pace/mounting dimension/ out torque and so forth.
five.If the bare minimum orEPTTamount is in excess of $10000, there are preferential.
Q1: What data ought to I inform you to verify the solution?
A:Model/Measurement, EPTT Ratio, Shaft instructions amp OrEPTTquantity.
Q2: What can i do if I don’t know which one particular EPT?
A:Dont worry, Send as considerably info as you can, our team will help you locate the rigEPTT one you are looking for.
Q3: What is your product guarantee period of time?
A:We offer 1 yr warranty because the vessel departure day remaining EPTT.
Q4: Are you investing company or maker ?
A: We are manufacturing facility.
Q5: How EPTT is your shipping and delivery time?
A: EPTTly it is five-ten daEPTTif the products are in inventory. or it is 15-twenty daEPTTif the items are not in inventory, it is in accordance to amount.
Q6: Do you supply samples ? is it free or additional ?
A: Of course, we could supply the sample for free of charge charge but do not shell out the EPT of freight.
Q7: What is your conditions of payment ?
A: Payment lt=1000USD, 100% in EPT. Payment gt=1000USD, thirty% T/T in EPT ,stability before shippment.
If you have one more concern, pls feel free to speak to us as under:
Make contact with Us
in Anyang Republic of Korea sales price shop near me near me shop factory supplier China Qualified Cast Iron Helical Gear ATA Series Shaft Mounted Gear Box manufacturer best Cost Custom Cheap wholesaler
Service & Quality controlWe supply thorough drawings and provide every time required. we have obtained the have faith in of consumers throughout the world. If you need to have any information or samples, please contact us and you will have our soon reply.
EPT Qualified Solid Iron Helical Equipment ATA Series Shaft Mounted Equipment Box
ATA sequence shaft mounted EPT EPTs with hardened EPTs have substantial carrying potential, easy EPT, ligEPT fat, low power use and so on qualities, input shaft of EPT is connected with motor by belt pulley, output hollow shaft joined with a key. It could be rather of electric powered drum to be EPT source for a belt conveyors and lifting equipments. It is extensively applied in the mining equipments, Concrete miXiHu (West Lake) Dis.ng batching EPT, Stone Crushers, Sand producing production line and other belt conveyor mechanical EPT regions.
The application of ATA shaft mounted EPT:
Agriculture, commerce, telecommunications sector, the foods sector, tobacco sector, automobile business, cement industry, mining business, miXiHu (West Lake) Dis.ng station belt conveyor technique.
Out-set shaft: Single essential hollow shaft, every design can choose 3 hollow diameter at most.
Anti run again system: Can meet up with any model, It’s really practical to be mounted.
EPT EPT: Challenging Iron steel, can be utilised outdoors.
Anti run back device: Can meet any product, It’s extremely handy to be mounted.
EPT belt conveyor EPT method is composed by ATA shaft-mounted EPT, torque arm, pulleEPTand motors. Whose EPT EPT from the motor to the EPT by means of the pulley, and then EPT passed to the EPT pulley via the hollow shaft and the EPT is fastened by torque arm, anti-down gadget can be configured. The program is convenient to set up use and keep
The maintenance of ATA shaft mounted EPT:
one. Just before starting the EPT must be loaded of N159 or N220 severe strain EPT EPT oils, till the EPT oil exhibits an intermediate placement
2. Right after a few months managing, the EPT want to adjust oil, interest it must be debris inside the EPT rinse before including new oil.
3. At the EPT hollow shaft ends and EPT pulley stop gland plate should fastened with locking screws.
four. The EPT pulley and the motor pulley need to be pXiHu (West Lake) Dis.Hu (West Lake) Dis.lel when they are installed and the belt tightness ought to be average.
| Rated EPT | Rated Torque | Input Velocity | Output Speed | Backstop |
| one.1KW~193KW | 180~17000N.m | 1400r/min, 900r/min, 500r/min | twenty five~300r/min | Option components, Anti-slip system |
The designs of ATA shafted mounted EPT:ATA35 ATA40 ATA45 ATA50 ATA60 ATA70 ATA80 ATA100 ATA125
Item images:
EPT:
Solution application:
Certificate:
Our company :
EPT reg was started in 1982, which has a lot more than 36 several years in R amp D and producing of EPTes, EPTs, shaft, motor and spare parts.
We can supply the correct solution for uncountable apps. Our items are extensively utilized in the ranges of metallurgical, steel, mining, pulp and paper, suXiHu (West Lake) Dis.Hu (West Lake) Dis. and alcoholic beverages industry and different other kinds of EPTs with a strong existence in the intercontinental industry.
EPT reg has become a reliable supplier, capable to offer substantial top quality EPTes.With 36 several years encounter, we guarantee you the utmost dependability and protection for equally merchandise and companies.
Consumer visiting:
FAQ:
1.Q:What kinds of EPT can you create for us?
A:Principal items of our company: UDL series speed variator,RV collection worm EPT EPT, ATA series shaft mounted EPT, X,B collection EPT EPT,
P series planetary EPT and R, S, K, and F collection helical-tooth EPT, much more
than one particular hundred models and hundreds of technical specs
2.Q:Can you make as for every custom made drawing?
A: Sure, we offer you tailored support for customers.
three.Q:What is your phrases of payment ?
A: thirty% Progress payment by T/T right after signing the contract.70% prior to delivery
4.Q:What is your MOQ?
A: 1 Set
If you have any need for our merchandise make sure you really feel free to make contact with me.
in Bacoor Philippines sales price shop near me near me shop factory supplier High Quality Hollow Shaft Helical Gear Reducer manufacturer best Cost Custom Cheap wholesaler
Having amassed valuable knowledge in cooperating with overseas clients, Service & Top quality controlWe provide comprehensive drawings and provide every time essential. Keeping in brain that very good support is the essential to cooperating with customers, we strive to meet large high quality expectations, offer you competitive costs and guarantee prompt supply. Large Performance Gear Pace EPT with Electrical EPT
A: Solution features
A.one. F collection: pXiHu (West Lake) Dis.Hu (West Lake) Dis.lel-aXiHu (West Lake) Dis.s pace reduction EPTing composed by helical EPTs, optimized and developed according to international stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd
A.2.Substantial precision, high effectiveness, fine classification in EPT ratio, extensive assortment, huge EPT torque, reputable performance, minimal sound, fleXiHu (West Lake) Dis.ble installation, and hassle-free use and routine maintenance.
A.3. They are commonly employed in numerous EPTs, which are EPT fundamental components of mechanical EPT.
| EPT material | EPT200 higher-power cast iron from F37,forty seven,fifty seven,sixty seven,seventy seven,87 |
| EPT materials | EPT250 Higher toughness solid iron from F97,127,157,167,187 |
| EPT hardness | HBS90-240 |
| Gear materials | 20CrMnTi |
| Floor hardnesss of EPT | HRC58 deg-sixty two deg |
| Gear core hardness | HRC33 deg-40 deg |
| Enter/Output shaft material | 40CrMnTi |
| Input/Output shaft hardness | HBS241 deg-286 deg |
| Shaft at oil seal postion hardness | HRC48 deg -55 deg |
| Machining precision of EPTs content | Exact grinding six-five quality |
| Heat remedy | tempering, cementing, quenching and many others |
| Effectiveness | up to 90% |
| Sounds(Max) | 60-68dB |
| Unit product | Foot mounted,flange mounted,hollow shaft mounted |
| Enter technique | flange enter,inline input,shaft input |
| Vibration | le 20um |
| Backlash | le 20Arcmin |
| EPT brands | NSK,C ampU and many others |
| Oil seal brands | NAK,SKF and so on |
| Lubricant | VG220 |
| EPT | IP55, F class |
| EPT shaft | 40Cr, Tempering, cementing,quenching etc. |
one.Our Companies
one.one.We give 12 months Guarantee.
one.two. We have countless numbers of EPT EPTs. From Enter EPT .06KW to 200KW, Ratio one.three-289.seventy four, Output velocity -1095rpm and Output torque one.4-62800Nm. They can meet your all diverse specifications for diverse EPT.
one.3. We offer E-catalog or Paper catalog,so you can pick the model simply according to your needs
one.4.You are welcome to visit our manufacturing unit to check our products,we can assist you to book the hotel or ticket
2.Organization Info
2.1.Our Firm:
The Predecessor for ZheJiang EPT Travel CO.,Ltd (initially referred to as HangEPT XiHu (West Lake) Dis.ngguang EPT EPTry CO.,Ltd) Point out-owned armed forces mould EPTrpriese which estabEPTd in 1965.
EPT is found in HangEPT,EPT and the manufacturing unit covers an spot of about 25000 sq. meters.
Manufacturing Capability:a lot more than 50 % a million sets of velocity EPT for every yr.
2.2.Our People:
The business has a powerful specialized power. It has far more than 400 personnel at present, incXiHu (West Lake) Dis.Hu (West Lake) Dis. more than forty engineering technicians and 10 specialists and senior engineers enEPTing EPT allowances of the State Council.
2.three. Our Certificates:
Passed quot ISO 9001 Global EPT Technique Certification quot, quotInternational EPT Credit AAA Ceritifacte quot , quot Swiss SGS Certificate quot, Iconic Manufacturer in EPT EPT Sector quot, quotFamous Brand name of ZheJiang Province quot, quotNon-community Scientific and Technological EPTrprise in ZheJiang Province quot, quotNational High and EPT-tech EPTrprise quot, quotTOP 50 in EPT Equipment Sector quot quot2011 HangEPT Engineering and Technological R ampD CEPTr quot and so on.
3. FAQ
Q:Are you a buying and selling organization or company?
A: HangEPT EPT Travel Co., Ltd previously was a State-owned XiHu (West Lake) Dis.ngguang Mould Factory, a point out-owned military EPT EPTrprise estabEPTd in 1965. It concluded reform in 2002. Since reform, EPT has deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed speedily. It took the lead in passing ISO9001 Intercontinental EPT Program Certificate and Worldwide EPT Credit rating AAA Certification in 2004, and Swiss SGS Certificate in 2009. It has won this sort of titles as quotIconic Brand name in EPT EPT Business quot, quotFamous Manufacturer of ZheJiang Province quot, quotNon-public Scientific and Technological EPTrprise in ZheJiang Province quot, quotNational Higher and EPT-tech EPTrprise quot, and quotTope fifty in EPT Equipment Industry quot successively
Q:In which do you foundation?
A: We are in HangEPT,ZheJiang ,EPT. We have two factories,EPT manufacturing facility is in XiHu (West Lake) Dis.hu (West Lake) Dis. district,HangEPT,EPT and the aged one particular is in CHangEPT District,HangEPT,EPT.
Q:What types of EPT can you make for us?
A:Principal goods of our firm: JWB-X series mechanical constantly variable EPT, RV series worm EPT EPT, B/JXJ cycloidal pin EPT velocity EPT, NCJ sequence EPT EPT, and R, F K, S collection helical-tooth EPT (SEW), a lot more than one particular hundred types and 1000’s of specs.
Q:What are the application of the EPT?
A:EPT are extensively utilised in ceramic, EPT, foods, metallurgy, beer amp consume, printing and dyeing, textile, petrochemical engineering, warehouse EPT, wooden-functioning EPT, environmental protection tools, printing and EPT, pharmacy, and leather-based. EPT are offered in some nations and areas, this sort of as Europe, The usa, and SouthEPT Asia, and it possesses dozens of distributors and right after-sale provider brokers.
Q:What is the materials you use?
A1: EPT EPT human body ( For the RV series worm EPT Dimensions 30~ninety)
A2: Forged iron(For the RV sequence worm EPT, Measurement a hundred and ten-one hundred fifty, For the NCJ amp F/R/S/K series helical EPT EPT)
Our manufacturing facility (ZheJiang EPT Push Co., Ltd.) is a large and renowned 6S stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPT manufacturing facility with all around 380 employees given that 1965 . We export to South Asia, SouthEPT Asia, Africa, Middle EPT, South The usa, North The usa, Europe…and so on. We supply EPT to SIEMENS,ABB,SACMI,BUHLER,MODENA,EPT…and so on. Sincerely hope to set up a get-earn organization relationship with you.
Anticipating to discuss about much more information with you !
Very best Needs
Jessica
Manufacturing facility: ZheJiang EPT Push Co., Ltd. (Preceding name: HangEPT XiHu (West Lake) Dis.ngEPTg EPT EPTry)
Incorporate: No.ten,HuiEPT EPT Park, EPTi City, XiHu (West Lake) Dis.hu (West Lake) Dis. District, HangEPT City, ZheJiang Province, EPT.
Tel 66639870
Web: www.xgcd.cn