TGP01D-A130	TGP01S-A130	TGP02D-A130	TGP02S-A130

Brushless Mini Plastic DC Equipment Motor TGP01D-A130 For Toy Car

Figures of Mini Plastic DC Gear Motor

• Voltage: 3v 6v
• Reduction Ratio: 1/40 8,,1/120,1/100 80,1/220,1/256,1/288
• Dize:64.2 X 22.5 X 18.8mm,60 4.2mm length micro motor
• The double facet
• can match with wheels, foremost wires, and battery boxes
• Samples can be despatched initial. The shipping time is fifteen-20 times

Gear motor dimension (mm)

 

Customization Service of Mini Plastic DC Equipment Motor

See what else customized companies we can provide to you?

 

one. gear 2. shaft 3. rear shaft 4. encoder 5. water-proof

Notice: All these customization providers will not likely CZPT to new tooling costs, just can have our gear motors suit your layout demands flawlessly
1. Gear variety: Helical, worm, spur,

Content: powder, copper, machined, plastic. all gears are made by our engineers
2. Shaft： hole on the shaft, sq. shaft, screw shaft…
3. Rear shaft: for encoder mounting or yet another component you want to mount
4. Encoder: hall sensor encoder
5. Water-resistant: protect motor nicely
6. an additional customization ask for if you want

Other Plastic Simple dc toy motor

What is a DC motor?

DC motor is a kind of motor that converts electrical power into mechanical energy. DC motor obtains electricity by means of DC and converts this power into mechanical rotation.
The DC motor utilizes the magnetic area produced by the produced current to provide electricity for the motion of the rotor mounted in the output shaft. The output torque and velocity depend on the electrical enter and the design of the motor.

How do DC Motors perform?

The time period ‘DC motor’ is employed to refer to any rotary electrical equipment that converts immediate present electrical vitality into mechanical power. DC motors can vary in measurement and electrical power from tiny motors in toys and appliances to massive mechanisms that electrical power automobiles, pull elevators and hoists, and push metal rolling mills. But how do DC Motors work?

DC motors consist of 2 important elements: a stator and an armature. The stator is the stationary portion of a motor, although the armature rotates. In a DC motor, the stator provides a rotating magnetic subject that drives the armature to rotate.

A straightforward DC motor makes use of a stationary set of magnets in the stator, and a coil of wire with a existing working by means of it to make an electromagnetic discipline aligned with the middle of the coil. One or much more windings of insulated wire are wrapped around the core of the motor to concentrate the magnetic field.

The windings of insulated wire are connected to a commutator (a rotary electrical switch), that applies an electrical existing to the windings. The commutator makes it possible for every single armature coil to be energized in flip, making a continual rotating drive (recognized as torque).

When the coils are turned on and off in sequence, a rotating magnetic subject is created that interacts with the various fields of the stationary magnets in the stator to produce torque, which causes it to rotate. These important operating principles of DC motors enable them to transform the electrical vitality from direct current into mechanical power through the rotating motion, which can then be used for the propulsion of objects.

Extra details

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the 2 most common motor types are the 3-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are 2 types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on 1 side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting 1 for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of 3 or more is suitable for difficult applications, while a gearmotor with a SF of 1 or 2 is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at 2 types: right-angle geared motors and inline geared motors. The first 2 types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every 6 months.